Prime Quality Product Sourcing. International Support to Business Owners & Purchasing Departments

PACKING AND TRANSPORT

Here below is some indicative information regarding the packing of the products.

Always contact U.M. for more information before ordering. There are also some advices regarding the transport

If you have special packing requirements, please do not hesitate to ask it in your inquiry

Pictures are indicative of packing. In some cases packing may be different than the packing shown in the photographs below.

Please do not hesitate to ask any question you might have regarding the packing

U.M., sometimes, if asked, can send you pictures regarding the packing of the products you have ordered,

provided the shipper has such possibility.

U.M. can always send you indicative details about the packing.

You need such details when you arrange for the transport

PACKING - LOADING

Coils

Standard wooden palettes for sheets / plates 1 – 2000 Kgs, wooden protection on the bottom, with plastic cover on the sheets

Palettes wooden, few sheets < 500 Kgs, Wooden Protection on bottom and full wooden coverage
on the top, with carton paper cover in between,

Palettes wooden, few sheets < 500 Kgs, with wooden protection on the bottom and sides,
and wooden frame protection on the top, with protective metal strips

Pallettes wooden, enhanced, for few sheets < 500 Kgs, wooden protection on bottom,
additional wooden part on top, protective wooden frame on top and protective strips, plastic film covers the sheets

Small wooden palettes ( approx. width – length – height 1000 mm X 1000 mm X 250 mm ),

Small quantity pipes/bars, wooden laths surrounding pipes/bars, with metallic strips,

Small quantity pipes – wooden supporting frames with plastic strips,

Large Diameter Round Solid Bars ( Rods ), covered with plastic film,
on a wooden pallette of narrow width with metallic or plastic strips,

Small quantity hollow bars with metals strips,

Paper carton boxes with metallic or plastic strips,

Plastic and paper wrap,

Advises on loading and shipment,

Coils

The “eye” of the coil is faced upwards, on a vertical position
A wooden palette has been used for the easy lift from a forklift
Wooden supports have been placed to the four corners
Wooden table has been placed on top for further protection
Strong plastic or steel stripes have been used horizontally for further support
Warning labels for extra protection have been placed
Labels showing destination, consignee, material type as well as net and gross weight
have been placed for easy identification of the goods
Hard paper covers the coils
VERY IMPORTANT:
The side of the truck must be opened, so as the palettes
can be placed/removed easily from the side.
VERY IMPORTANT:
In some cases, in some suppliers, the loading can take place only from above.
Please check with your transport company.

Sheets 1 – 2000 Kgs , standard packing, wooden palettes, wooden protection on the bottom, with plastic cover on the sheets

A wooden palette has been used for the easy lift from a forklift.
Wooden table has been placed on top for further protection, however,
this does not take place all the time.
Strong plastic or steel strips have been used vertically for further support
Warning labels for extra protection have been placed
Labels showing destination, consignee, material type as well as
net and gross weight have been placed for easy identification of the goods.
Hard paper covers the pile of sheets
Plastic cover is placed on top of the paper cover for further protection
Anti-moisture bag has been placed inside the pile of sheets, usually this is placed for
aluminium sheets and is not used by all companies.
VERY IMPORTANT:
The side of the truck must be opened, so as the palettes can
be placed/removed easily from the side.
VERY IMPORTANT:
In some cases, in some suppliers, the loading can take place only from above.
Please check with your transport company.

Palettes wooden, few sheets < 500 Kgs,
Wooden Protection on bottom and full wooden coverage on the top, with carton paper cover in between

This palette is for few sheets. It allows to be loaded / unloaded by forklift.
It has a wooden protection in the bottom and on full wooden coverage the top and carton paper cover in between.
Sometimes there is enhanced protection on the side
OR
there is additional protection with metals strips.
It is stowable but it must be stowable in a way that it will not harm the goods.
Usually in such cases with few Kgs weight of metal sheets, heavy loads can’t be placed on top of the pallette.
The maximum level of weight on top of the pallette must be determined by the transport company.
Please check with your transport company.
There are cases where in the place of loading, the supplier does not accept other goods to be placed on top of the pallette.

Palettes wooden, few sheets < 500 Kgs, with wooden protection on the bottom and sides,
and wooden frame protection on the top, with protective metal strips

This palette is for few sheets. It allows to be loaded / unloaded by forklift.
It has a wooden protection in the bottom and on the top
and on the sides and wooden frame protection on the top, with protective metal strips.
Usually such cases with few Kgs weight of metal sheets can’t take

heavy loads on top of it but can take more load than the package
shown on the previous photo. It is stowable but it must be stowable in a way that it will not harm the goods.
It is common with such cases with few Kgs weight of metal sheets, heavy loads can’t be placed on top of the pallette.
The maximum level of weight on top of the pallette must be determined by the transport company.
Please check with your transport company.
There are cases where in the place of loading, the supplier does not accept other goods to be placed on top of the pallette.

Palettes wooden, enhanced, for few sheets < 500 Kgs, wooden protection on bottom, additional wooden part on top,
protective wooden frame on top, and protective strips, plastic film covers the sheets

This palette is for few sheets. It allows to be loaded / unloaded by forklift.
It has a wooden protection in the bottom and on the top and on the side.
Sometimes there is enhanced protection on the side
OR
there is additional protection with metals strips and EXTRA wooden protection frame on the top.
It is stowable but it must be stowable in a way that it will not harm the goods.
Usually in such cases with few Kgs weight of metal sheets can’t take heavy loads on top of it.
The maximum level of weight on top must be determined by the transport company.
Please check with your transport company.
No wooden cover on the perimeter but still a hard plastic cover and a nylon sheet cover.
Quite suitable for plastic or metallic sheets. Metal Strips hold wooden parts together.

Small wooden pallettes ( approx. width – length – height 1000 mm X 1000 mm X 250 mm )

Small pallette.
Usually for round bars of small length or cut pieces from plate.
Stackable: Best if only placed on top of other goods. Not to be placed below other goods.

Small quantity pipes/bars, wooden laths surrounding pipes/bars, with metallic strips

Wooden packing ( wooden laths ) for small quantity of pipes and round bars, wrapped with strips.

Large Diameter Round Solid Bars ( Rods ), covered with plastic film,
on a wooden pallette of narrow width with metallic or plastic strips

Large diameter round solid bars ( rods ) are placed on a wooden pallette cut to size.
The bars are covered with plastic film and are tied on the pallette with metallic or plastic strips.
THE PALLETTE IS PLACED ON THE FLOOR OF THE TRUCK AND IN MANY CASES DEPENDING
THE ALLOY OR THE APPLICATION, OTHER CARGO MUST NOT BE PLACED ON TOP OF THE BARS

Small quantity pipes/bars, wooden supporting frames with plastic strips

Wooden packing for small quantity of pipes and round bars.
WOODEN RECTANGULAR FRAMES AND PLASTIC STRIPS USED

Small quantity hollow bars with metal strips

Small quantity hollow bars tied with metal strips only.
Can be loaded / unloaded by crane to/from the roof of the truck. Placed at the floor of the truck, well tied with strips on the truck.
Other goods may be placed on top of them provided they are not heavy and provided you do not
request very strict straigthenss tolerances, that depends on your indented application. It can be up to the warehouse manager
of where the loading takes place whether other goods can be placed on top of them

Paper Carton Boxes with metallic or plastic strips

Paper carton boxes usually for plastic bars or low weight metallic bars.

Plastic and paper wrap

Small plastic and paperbox usually for cut pieces from plate ,i.e 20 – 30 Ksg and size 300 mm X 300 mm or 620 mm X 620 mm, etc.
Sometimes hard plastic cover on top and bottom and plastic bubble wrap surrounding the material.

Advises on Loading & Shipment

Important Information !: Should you arrange for the transport, you must check with the supplier for the following:
Truck entering company’s warehouse halls may be asked to follow only indicated traffic direction.

If the shipper requires the incoming trucks to be Euro 3 or Euro 4 Class category.
If the shipper requires that loading can be effected only from the top of the truck by the use of crane and not from the side.
If the shipper has forklift in case that loading by the side is possible.
If the driver has to wear gloves, special boots and helmet during the loading of goods.
If the driver must have anti slips mats.
If the driver must have tension belts for the tie down
What are the loading hours that the shipper operates.
You must make sure that when the truck arrives at your premises for the unloading, you have the necessary means for the unloading ie forklift.
In cases of export licenses ask from your transport company the truck to not pass through free trade zones,
best not the truck to be an independent driver but to be part of the transport company’s fleet.
Suppliers may not be held liable for any damage resulting from the driver not following safety measures asked by the supplier.
Standard transport insurance provided by the transport company is not enough.
Always insure the transport for 110 % of the invoice value through an insurance company, this costs for small orders about 30 Euro / shipment.

[

Contact

]

+44-2033-182166

send R.F.Q.

info [ at ] u-metals.com
sourcing [ at ] utility-metals.com

utility-metals

chat below

[

Search Site

]

Search:

[

Your Country

]

[

Translate Page

]

[

Connect

]

Company:
UTILITY METALS UK LTD
Registered in England & Wales
Registered & Trading Address:
483 Green Lanes, Palmers Green,
London, N13 4BS, U.K.
Company #: 08383517,
VAT: GB176985149,
EORI customs #: GB176985149000

Products:

Stainless Steels
Aluminium
Non Alloyed & Alloyed Steels
Copper & Brass
Nickel and Nickel Alloys
Titanium
Industrial Plastics

Cookies may be used in this web site. Cookies help U.M. deliver its services . By using U.M.’s services, you agree to its use of cookies, if not, please leave this website
There may be variations from the photos shown above to the actual products in color, texture, shading, these can vary also from production lot to production lot
The product trade names and the business names mentioned in this web site are properties of their respective owners